FP1 LED tile profile middle 200 cm, LED Strips max. 14 mm
| Item name | FP1 LED tile profile middle 200 cm, LED Strips max. 14 mm |
|---|---|
| Article number | 8102032 |
| Length [mm] | 2000,0 |
| Width [mm] | 57,0 |
| Height [mm] | 11,0 |
| Max. flexstrip width [mm] | 14 |
| Installation depth [mm] | 11,00 |
| Internal height [mm] | 10,00 |
| Weight [g/pc] | 458 |
| Description | Designed for tile concepts! This FP1 LED tile profile middle is available in standard lengths of 200 cm, 250 cm and 300 cm and is designed for LED flex strips with a maximum width of 12 mm. This profile system has large wings on both sides (20 mm wide), which are filled with tile adhesive and thus integrated into the tile concept. The tiles are glued to the wings. The FP1 LED tile profile dissipates heat very well due to its large surface area. Important note: Use in wet rooms or outdoors is only possible in sealed form. Silicone, which is applied to the joints to seal them, offers special protection against moisture and water. Absolute watertightness is achieved with LED profile systems by casting with wepuran casting resin based on polyurethane resin (PUR). When selecting the LED strips, pay attention to the protection class specified by the manufacturer (at least IP65). Applications Bathroom/WC Kitchen Utility room/cellar Technology rooms SPA and wellness areas Swimming pools Car washes Basically in every tile concept |
| Colour | silber eloxiert |
